K3HB-VLC-L2BT11 AC/DC24 Power supply voltage 24 VDC 24 VAC 50/60 Hz Allowable power supply voltage range 85 to 110% of the power supply voltage Power consumption 7 W max. (at maximum load)/11 VA max. (at maximum load) External power supply 10 VDC ±5% 100 mA Input type Load dell/DC voltage Output type Judgment output: Transistor Comparative output: HH, H, PASS, L, LL Transfer output: Linear voltage Voltage measurement input Measurement range A: 0.00 to 199.99 mV B: 0.000 to 19.999 mV C: ±100.00 mV D: ±199.99 mV Accuracy A: ±0.1% rdg ±1 digit max. B: ±0.1% rdg ±5 digit max. C: ±0.1% rdg ±3 digit max. D: ±0.1% rdg ±1 digit max. Input impedance 1 MΩ min. Allowable instantaneous input (30 s) ±200 V Load cell measurement input Measurement range A: 0.00 to 199.99 mV B: 0.000 to 19.999 mV C: ±100.00 mV D: ±199.99 mV Accuracy A: ±0.1% rdg ±1 digit max. B: ±0.1% rdg ±5 digit max. C: ±0.1% rdg ±3 digit max. D: ±0.1% rdg ±1 digit max. Input impedance 1 MΩ min. Allowable instantaneous input (30 s) ±200 V Event input Number of input 5 point Input method NO-Voltage contact/NPN open collector Event name Timing input Startup compensation timer input Hold input Forced-zero input Reset input Connection method Terminal blocks Contact ON: 1 kΩ max. OFF: 100 kΩ min. No-contact ON residual voltage: 2 V max. (TIMING input 3 V max.) OFF leakage current: 4 mA max. (TIMING input 17 mA max.) Maximum applied voltage: 30 V max.DC Leakage current: 0.1 mA max. (TIMING input 1.5 mA max.) Judgment output Transistor output NPN open collector Maximum load voltage: 24 V max.DC Maximum load current: 50 mA max. Leakage current: 100 µA max. Linear output Linear voltage 0 to 5 VDC/1 to 5 VDC/0 to 10 VDC Allowable load impedance: 5 kΩ min. Resolution: Approx. 10000 Output error: ±0.5% FS (1 V or less: ±0.15 V, not output for 0 or less) Display Display method Negative LCD (backlit LED) 7-segment digital display Digits 5 digit (-19999 to 99999) Character height PV: 14.2 mm (green/red) SV: 4.9 mm (green) Sampling period 50 times/second (20 ms) Comparative output response time 100 ms max. (time until the comparative output is made when there is a forced sudden change in the input signal from 15% to 95% or 95% to 15%.) Linear output response time 150 ms max. (time until the final analog output value is reached when there is a forced sudden change in the input signal from 15% to 95% or 95% to 15%.) Insulation resistance 20 MΩ min. (at 500 VDC) Dielectric strength Between the entire external terminal and case: 2, 300 VAC 1 min Noise immunity ±1, 500 V at power supply terminals in normal or common mode (waveform with 1-ns rising edge and pulse width of 1 µs/100 ns) Vibration resistance Malfunction: 10 to 55 Hz, Acceleration: 50 m/s2, 5 min 10 sweeps each in X, Y, and Z directions Shock resistance Malfunction: 150 m/s2, 3 times each in 3 axes 6 directions Degree of protection Front: NEMA4X for indoor use (equivalent to IP66) Case rear: IP20 Terminals: IP00 + finger protection (VDE0106/100) Memory protection EE-PROM (non-volatile memory) Number of rewrites: 100, 000 Ambient temperature Operating: -10 to 55 ℃ (with no freezing or condensation) Storage: -25 to 65 ℃ (with no freezing or condensation) Ambient humidity Operating: 25 to 85 % Accessories Waterproof packing, Fixtures, Terminal Cover, Unit label, Instruction manual Weight Approx. 300 g #OMRONdealergujarat #OMRONservodrive #OMRONservomotor #OMRONproximitysensor #OMRONsmps #OMRONencoderdealer #OMRONdealermumbai